How to conceal TV wiring
It doesn’t take much criticism to find the spaghetti-like tangle of wires at the bottom of your wall-mounted TV annoying. The narrow lines of your flat-screen TV, after all, allow room design to take center stage, and naughty TV wires only serve to accentuate this.
In the cable management box, conceal the wires.
Given that it has numerous power wires coming from it, this floor extension is the cause of numerous visual issues. This cord plug serves as a magnet to draw dust and other material up off the floor.
The cable management box, which is made of sturdy ABS plastic, elegantly conceals the extension cord and extra cables in a container that blends in with the surroundings. Common hues include wood tones, off-white, white, and black. Some are even paintable.
You can open or close the side cable ports as necessary. The majority of boxes contain slots or vent holes for covert ventilation.
Use handmade cable ties to secure TV wiring.
With cable ties, a little goes a long way. If you’re not yet ready for more secure wire hiding solutions, you can thin out the bulky bundle of wire by bundling it with a few individual cable ties spaced roughly per foot.
Additionally, you don’t need unique cable ties. Purchase a 3/4 “Cut as much black Velcro tape as you require off a roll. For less than $15, you can get a 10-foot roll that will tie up all the necessary TV wires.
Using ductwork and wall ducts, conceal TV wires
Wall-mounted TV wires must travel a fair distance upward while remaining undetectable. This distance can range from 10″ to 31″ depending on the size of your TV and the mounting height you select “(with a 12” outlet height). Wall channels and channels are the solutions to this issue.
To conceal television wires, conduits and ducts are flat or D-shaped tubes that run along the surface of the wall. Typically, the backboard is either fastened with self-adhesive material or bolted into drywall with anchors. The ornamental plate will click into place on the back once the cords have been threaded.
Plastic wall channels and channels are created in muted hues to blend nicely with the walls. The majority of them can be painted to match the wall’s hue.
Wire TVs under crown molding or wall trim.
The wall-to-ceiling corner is joined by the ceiling plinth, which provides plenty of area for running TV wiring throughout the room.
It is challenging to gently remove and reinstall the crown molding. However, using metal electrical tape, straight parts of the current crown molding can be removed. You will need to access the space in order to do this by removing a portion of the crown molding at the end.
There is frequently a narrow slot on the back of the door skin, barely big enough for the wire, for thin speaker cables that must run vertically along the wall.
The extension’s wall attachment
The extension cord appears unkempt and unsteady when it is lying on the floor next to the TV. To quickly eliminate cable clutter and maintain order, just move an extension cord off the floor and fasten it to the wall.
Power splitters’ rear keyholes can be challenging to see. The band won’t fit properly if you even slightly mix up the screws. You’ll have it in a matter of minutes once you understand how simple it is to install an extension cord.